The Role of Kitchen Design Consultants in Commercial Foodservice Projects
Updated: Oct 10
By Brad LaBel, LaBel Foodservice Equipment & Design
About the author: Brad LaBel is a CIA-trained chef and commercial kitchen designer with 30+ years of experience. He founded LaBel Foodservice Equipment & Design, Inc. in 1998, based on Long Island, NY. LaBel serves clients nationwide through ChefVue™, a remote collaborative kitchen design service via Zoom that delivers construction-ready CAD. Brad is an active CIA consultant on teaching kitchen design and has been featured in Total Food Service and Foodservice Equipment & Supplies.
I get asked some version of this question on almost every project: "Do we really need a kitchen design consultant, or can the architect handle it?"
The honest answer is that architects handle the building. Kitchen consultants handle the operation inside it. Those are two different disciplines, and on a commercial foodservice project, you need both.
Here is what a commercial kitchen design consultant actually does — and why the distinction matters for your project.
We design from the inside out
Most people picture kitchen design as a floor plan exercise. Move the equipment around until it fits. That is not how we work at LaBel.
We start with the operation. What is the menu? How many covers per service? How many staff are working the line at peak? Where does food arrive, and what happens to it between receiving and the plate? Which pieces of equipment share utility connections, and which need to be isolated?
Once those questions have answers, the layout follows. Equipment that looks great on a rendering but creates a crossed traffic path, or a cooking suite that overloads the available gas capacity, or a ventilation hood positioned where it will fight the ceiling structure — these are all problems that a proper operational analysis catches before they become construction problems.
That is the job of a kitchen design consultant.
What we actually coordinate
On a full commercial kitchen project, a consultant’s scope typically covers:
Needs assessment and programming. Understanding your menu, volume, staffing, service model, and budget before anyone draws a line. The Cal Poly project we completed — featured in Foodservice Equipment & Supplies — started with exactly this kind of deep operational analysis, because a teaching kitchen has very different programming requirements than a restaurant.
Space planning. Developing layouts that maximize the available footprint while protecting workflow logic. This is not just fitting equipment into a room. It is making sure the room functions the way the people using it need it to.
Equipment specification. Recommending the right equipment for your menu and volume — not the most expensive, and not the cheapest. Equipment that matches your utility capacity, your staff’s skill level, and your service demands. At Lost Marble Brewing, we saved the client 15% on their total kitchen package by re-speccing the layout and adjusting the equipment selections before anything was ordered.
Compliance and code coordination. Health department, fire marshal, building department — the requirements vary by jurisdiction and change over time. We make sure the design satisfies them from the start rather than discovering a code issue during inspection.
MEP coordination. Every piece of commercial kitchen equipment has electrical, gas, water, drain, and ventilation requirements. Getting those requirements to the mechanical and electrical engineers early prevents costly late-stage changes.
Project coordination. From the first design session through installation, keeping equipment deliveries, contractor schedules, and utility connections aligned. On complex projects like The Bristal Assisted Living renovations — where we completed work across Lynbrook, Armonk, Woodcliff Lake, Boca Raton, and Greenwich — phasing and coordination were as important as the design itself. Residents need meals every day while the kitchen is being rebuilt.
Why “chefs designing for chefs” matters
I graduated from the Culinary Institute of America and cooked professionally — at Lundy’s Famous Seafood House and at a U.S. Air Force base in Germany — before I designed kitchens. That background is not a credential I mention for its own sake. It changes how I look at a layout.
I know what it feels like to work a hot line during a busy service. I know where a cook needs a landing area, where a reach-in that is six inches too far away causes real problems over an eight-hour shift, and where a ventilation hood positioned incorrectly fills the room with heat that has nowhere to go. My team at LaBel brings that operator’s perspective to every project.
When I serve as a consultant to the Culinary Institute of America on teaching kitchen design, it is that same perspective I bring: design the space for the people who will use it every day, not just for the rendering.
When to bring in a consultant
The right time is early — ideally before the architect has finalized the footprint. The foodservice scope affects plumbing rough-in locations, electrical panel sizing, structural requirements for ventilation equipment, and floor drain placement. Changes to any of those after construction has started cost real money.
If you are further along and want an independent review of an existing design, ChefVue™ covers workflow, equipment, utilities, and budget in a structured remote session via Zoom, delivering construction-ready CAD, available nationwide.
If you are starting fresh, reach out at labelfoodservice.com or learn about our remote design process at chefvue.com.
Frequently Asked Questions
What does a commercial kitchen design consultant actually do that an architect doesn’t?
An architect designs the building — structure, egress, finishes, code compliance at the building level. A kitchen design consultant designs the operation inside it: workflow, equipment specification, utility coordination, ventilation design, code compliance for health and fire, and phased installation management. On a commercial foodservice project, both disciplines are necessary. The architect cannot substitute for the consultant, and the consultant does not replace the architect. The two scopes have to be coordinated — which is exactly what we manage at LaBel.
When in the project process should I hire a kitchen design consultant?
As early as possible — ideally before the architect finalizes the footprint. The foodservice scope drives plumbing rough-in locations, electrical panel sizing, structural requirements for ventilation, and floor drain positions. Changing those after construction has started is expensive. We have come into projects late and helped owners avoid mistakes, but every week earlier we engage is a week where changes are cheaper.
How much money can a good kitchen design consultant actually save?
It depends on the project, but the savings are concrete. At Lost Marble Brewing, we saved 15% on the total kitchen package by revisiting the equipment spec after the layout was right. At Rockaway Hunting Club, we caught a major ventilation issue before the build started — avoiding a mid-construction correction that would have cost multiples of our fee. The fee for a kitchen design consultant is almost always recovered in avoided change orders alone.
Does LaBel work on projects outside of Long Island?
Yes. ChefVue™ — our remote collaborative kitchen design service delivered via Zoom — was built specifically for clients outside the New York metro area. We develop layouts, equipment specifications, and construction-ready CAD documents for projects nationwide. Learn more at chefvue.com.
What makes LaBel different from other kitchen design consultants?
We are operators first. I graduated from the CIA and cooked professionally before I designed kitchens. That experience — understanding what it actually feels like to work a hot line during peak service — is built into every layout decision we make. We also manage the full scope: design, equipment specification, project coordination, and installation management. We are not a design firm that hands off drawings and disappears.
%20(1).png)



Comments